[doyitaaron]

The front grill is like a graph paper grid. You affix the badge around the vertical (" l ") fat part of the grill. It should be the 3rd row from the top of the grill and the 4th from the right (see pic for reference). I used cable ties to tie it together (see amazon link) https://www.amazon.com/gp/product/B00QSIMSSA/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1. You can stack 3 cable tie bases side by side on the adhesive backing of N Line badge and it will be flush with the badge. Then you can use the zip ties to form loops to tie them together to create a line of zip ties to wrap around the " l ", because one zip tie isn't enough to wrap around the " l ". Since the zip ties are skinny and they are black it isn't noticeable, looks like the badge is floating or was like that from factory. Clamps might be noticeable since they are thick. If you need any more help let me know.

 

[CalculonsTalent]

The front grill is like a graph paper grid. You affix the badge around the vertical (" l ") fat part of the grill. It should be the 3rd row from the top of the grill and the 4th from the right (see pic for reference). I used cable ties to tie it together (see amazon link) https://www.amazon.com/gp/product/B00QSIMSSA/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1. You can stack 3 cable tie bases side by side on the adhesive backing of N Line badge and it will be flush with the badge. Then you can use the zip ties to form loops to tie them together to create a line of zip ties to wrap around the " l ", because one zip tie isn't enough to wrap around the " l ". Since the zip ties are skinny and they are black it isn't noticeable, looks like the badge is floating or was like that from factory. Clamps might be noticeable since they are thick. If you need any more help let me know.

Thanks! The zip tie boxes are an ingenious solution.

I don't think my logo has the box to the right of the N as blue. I gotta check now.

 

[doyitaaron]

The front grill is like a graph paper grid. You affix the badge around the vertical (" l ") fat part of the grill. It should be the 3rd row from the top of the grill and the 4th from the right (see pic for reference). I used cable ties to tie it together (see amazon link) https://www.amazon.com/gp/product/B00QSIMSSA/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1. You can stack 3 cable tie bases side by side on the adhesive backing of N Line badge and it will be flush with the badge. Then you can use the zip ties to form loops to tie them together to create a line of zip ties to wrap around the " l ", because one zip tie isn't enough to wrap around the " l ". Since the zip ties are skinny and they are black it isn't noticeable, looks like the badge is floating or was like that from factory. Clamps might be noticeable since they are thick. If you need any more help let me know.

Thanks! The zip tie boxes are an ingenious solution.

I don't think my logo has the box to the right of the N as blue. I gotta check now.

Oh the blue was something I did on my my own. I cover the black box with vinyl wrap. Wanted to break up the color and add performance blue to the N Line logo.

 

[CalculonsTalent]

Oh the blue was something I did on my my own. I cover the black box with vinyl wrap. Wanted to break up the color and add performance blue to the N Line logo.

The blue is a great touch. I might have to do the same with the inside of the GT badge (though red for me).

Thanks again

 

[CalculonsTalent]

I also found some Kona badges on eBay that had measurements posted in the description and while they were all super sloppy and approximate, I think it's close enough, so I just ordered a Kona front cover to try out.

Kona front cover does NOT fit. It's close, but the Kona cover is too big. Oddly this one is a little scuffed up compared to the other one I received so I'm not sure if I can even sell it to a Kona owner.

I might just try to heat it up and see if I can shrink it some?

Lame.

 

[0xMatt]

I know this thread is old but it's been some time so I figured I'd see if anyone knew if we had any grills available for our GT yet?

The dimensions of the Elantra Sport in 2017-2018 seem to be very similar to our cars, would the ones made for that fit or am I just being way too optimistic?

 

[stateofstatic]

This has been rather frustrating for me as well...have a 2020 elantra gt n line and want a solution for either a black hyundai front badge (since the whole oval is flat I cant plastidip or vinyl it) or just a badgeless grill replacement and there seems to be literally nothing out there. Got excited finding the i30 N had a black badge until I realized the grill is different so now Im back to square one again...fook

 

[0xMatt]

I sent an email to the guys who make: 2017 - 2018 Hyundai Elantra Sport Mesh Grill Insert kit by customcargrills which is the most progress I've made.

They said they'd have a grill available sometime around the beginning of next year. I'll reach out to a few other manufacturers.

 

[Sence]

I wrote custom car grills an email today asking if I bought a sheet of mesh and mocked it up on my 2020 N Line would they offer me a discount for the dimensions. This was their response.

"Sence, we have the bumper here and are currently in development. Typically I would gladly take you up on your offer, but in the rare circumstance you caught me while we’re already in progress. Hoping to have these ready to ship in January."

I'm going to buy one as soon as they're available